CHANNELS

Our Premium Channels Depth – The tolerance on depth of channels shall be as follows :

Depth Tolerance
Over mm Up to and including mm mm
200 ±2.5
200 400 ±3.0

Width of Flange : The tolerance on Flange width up to and including 100 mm shall be +2mm. Flanges out-of-square or Out-of-parallel — The Flanges shall be parallel within 1 in 60 tolerance. (See Frg 1.1)

Flatness of Web : The tolerance on flatness of outer face of web shall be as follow : (See Fig 1.2)

Concavity Not Permitted
Convexity 15% of nominal thickness of web

Cumber & Sweep : The maximum permissible cumber and sweep for channels shall be 0.20 percent of the length (see fig 1.3)

S.No Size of Channel
1 Channel Heavy – 75 X 40 , 100 X 50
2 Channel Medium – 75 X 40 , 100 X 50
3 Channel Light – 75 X 40 , 100X50
4 Channel Heavy – 125X65
5 Channel Heavy – 150X75
6 Channel Light – 125X65
7 Channel Light – 150X75
Weight : The tolerance on weight per meter shall be : 2.5% for steel conforming to IS : 2062

Dimensions and Properties (As per IS:2062 Specification)

Min. Weight (kg/mtr) STD Weight (kg/mtr) Max. Weight (kg/mtr) D (mm) B (mm) t (mm) T (mm) Flange Slope Degree R1 (mm) R2 (mm)
MC 75 6.9615 7.140 7.3185 75 40 4.8 7.5 96 8.5 2.4
MC 100 9.321 9.560 9.799 100 50 5.0 7.7 96 9.0 2.4
MC 125 12.7725 13.100 13.4275 125 65 5.3 8.2 96 9.5 2.4
MC 150 16.380 16.800 17.220 150 75 5.7 9.0 96 10.0 2.4
Physical Properties and Chemical Composition

of Structural Steel As per IS:2062:2006

Grade Designation Quallity Chemical Composition Mechanical Properties
Ladle Analysis, Percent & Max. Tensile Strength Min. M. Po. Yield Streess Mn. M. Po. Elangation %Min. of Gauge Length 5.65 Identical Based Diameter Max.
C Mo S P Si CE <20 <25
E-250 (480W) A 0.23 1.50 0.045 0.045 0.400 0.420 410 250 23 2t

GP Sheets

We offers a comprehensive range of galvanized coils, galvanized sheets, galvanized steel coils, hot dip galvanized coils, galvanized steel sheets, plain steel sheets, corrugated steel sheets and cold rolled steel coils, which have carved a niche in domestic as well as overseas market. The metal used in the manufacturing of these products is of superior quality and ensures their long life high performance. We offer galvanized plain sheets, galvanized corrugated sheets, galvanized plain coils, galvanized corrugated coils and many more. These products are available in myriad of thickness, width, length and other dimensions to befit the requirements of our clients.

CR Sheets

Buy CR Sheet made using top-grade raw materials at competitive prices form us. We are among the best Suppliers in town. A capacious warehouse and well-organized Warehouse Management System helps us in loading and unloading of all the products within short time. We keep our inventory updated by recording warehouse transactions and delivery of goods.

 

Features :

  • Thickness options available
  • Hard & long lasting
  • Corrosion resistant

 

  • Thickness : 0-10mm
  • Color : Grey
  • Material : Metal
  • Width : 0-400mm
  • Shape : Flat
  • Type : Cr Sheets

HR Sheets

We make available high quality HR sheets in varying widths and customized sizes. Being an illustrious Supplier of Mild Sheets, we endeavor to achieve 100% customer satisfaction. We have high-tech and spacious storage unit that is incorporated with all required amenities vital for a safe storage of the products till the final send off. Supervised by efficient personnel, they ensure zero damage to the items to keep up the standards.

ANGLE

Equal Angles Angle : The tolerance on Leg length shall be as follows :

Over (mm) Up to and including (mm) Tolerance
45 +1.5 mm
45 100 +2.0 mm
100 +2 %

Out of Square : The leg of angles shall be perpendicular to each other within a tolerance of + 1.0degree. The difference between the leg lengths of equal leg angles shall limited to 75 percent of the total tolerance (plus and minus) specified on the leg length.

 

Equal Angles Angle : The tolerance on Leg length shall be as follows :

Over (mm) Up to and including (mm) Tolerance
45 +1.5 mm
45 100 +2.0 mm
100 +2 %
Out of Square : The leg of angles shall be perpendicular to each other within a tolerance of + 1.0degree. The difference between the leg lengths of equal leg angles shall limited to 75 percent of the total tolerance (plus and minus) specified on the leg length.
 
 




Equal Angles Camber : The permissible limits for camber are as follows :-(See Fig 1.4)

Leg Length (mm) Chamber Max. (mm)
Less than 100 o be agreed between the manufacturer and purchaser
Including and over 100 0.2 % of Length


S.No Size of Angles
1 45 X 45 X 5,6
2 50 X 50 X 5, 6
3 65 X 65 X 5, 6
4 65 X 65 X 8,10
5 75 X 75 X 5, 6
6 75 X 75 X 8,10
7 90 X 90 X 6,8,10
8 100 X 100 X 6,8,10

 

Dimensions and Properties (As per IS 2062:2006 Specification)

Size Min Weight (kg/mtr) STD Weight (kg/mtr) Max. Weight (kg/mtr.) Root Radius Rs (mm)
45×5 3.295 3.400 3.570 5.50
45×6 3.880 4.000 4.200 5.50
 
50×3 2.185 2.300 2.415 6.000
50×4 2.910 3.000 3.150 5.00
50×5 3.586 3.800 3.990 6.00
50×6 4.365 4.500 4.725 6.00
 
55×4 3.201 3.300 3.465 6.50
55×5 3.977 4.100 4.305 6.50
55×6 4.753 4.900 5.145 6.50
55×8 6.208 6.400 6.720 6.50
 
60×4 3.589 3.700 3.885 6.50
60×5 4.365 4.50 4.725 6.50
60×6 5.238 5.400 5.670 6.50
60×8 6.790 7.000 7.350 6.50
 
65×4 3.880 4.000 4.200 6.50
65×5 4.755 4.900 5.145 6.50
65×6 5.626 5.800 6.090 6.50
65×8 7.469 7.700 6.085 6.50
 
70×5 5.141 5.300 5.565 7.00
70×6 6.11 6.300 6.615 7.00
70×8 8.051 8.300 8.715 7.00
70×10 9.394 10.200 10.710 7.00
 
75×5 5.529 5.700 5.985 7.00
75×6 6.596 6.800 7.140 7.00
75×8 8.633 8.900 9.345 7.00
75×10 10.670 11.000 11.550 7.00
 
80×6 7.081 7.300 7.665 8.00
80×8 9.312 9.600 10.080 8.00
80×10 11.446 11.800 12.390 8.00
80×12 13.580 14.000 14.700 8.00
 
90×6 7.954 8.200 9.660 8.50
90×8 10.476 10.800 11.340 8.50
90×10 12.998 13.400 14.070 8.50
90×12 15.326 15.800 16.590 8.50
 
100×6 8.924 9.200 9.660 8.50
100×8 11.737 12.100 12.705 8.50
100×10 14.453 14.900 15.645 8.50

TMT BAR

Strength of the bars are carefully controlled by optimizing the water pressure for their pearlitic core and tough surface of tempered martensite, thereby providing an optimum strength, ductility and toughness. TMT bars are widely used in general purpose concrete reinforcement structures, bridges and flyovers, dams, thermal and hydel power plants, industrial structures, high-rise buildings, underground platforms in metro railway and rapid transport system. TMT Bars are thermo-mechanically-treated through leading world tempcore based technology for high yield strength. The process involves rapid quenching of the hot bars through a series of water jets after they roll out of the last mill stand. The bars are cooled, allowing the core and surface temperatures to equalize. The bar core cools down slowly to turn into a ferrlite-pearlite aggregate.

COLOR COATED SHEETS

Rksteeljaipur has launched COLOUR MAX Sheets in Pan India and our target is to increase market share in couple of years. Rksteeljaipur Colour Max Colour Coated Roofing Sheets have very Low Maintenance, High resistance to weather, strong, safe and durable, High strength to weight ratio, Leak proof, Thermally efficient.

Quality policy

We at Rksteeljaipu are committed for continuous improvement in the quality system. We shall endeavour for customer satisfaction by providing quality product through on time delivery, enhancement in turnover, control on raw material consumption & trained motivated employees at all level.

Select from Spectrum of colors

Discover the world of colors with Rksteeljaipu pre painted products. Our versatile color metal products make your dream building look stylish and elegant. We offer wide variety of colors for your selection which comply with international RAL system, the international standard for the standard colors used in architecture, construction, industry and road safety.

Excellent Durability and Adherence

Rksteeljaipu products are made from carefully selected raw material and strict quality adherence policies. Our long association with steel industry and strong technical know-how enables us to choose the best raw material quality and deliver the best to you. The raw material used (Pre painted galvanized sheet, Galvalume sheets) possess some inherent qualities which enhances the durability and endurance of the finished product.